86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


Wuhan Carman Haas Laser Technology Co.,Ltd.

Showing 11 - 19 of 19, total 2 pages        [First] [Previous] [Next] [Last]

11
brewster window/tfp
brewster window/tfp
Specification: TFP coating@10.6µm Rs �98% & Tp �97%
Detail: Brewster window is uncoated substrate used in an optical system at Brewster Angle. It is used to separate the S polarization from the P polarization. Thin Film Polarizer (TFP's) is used to split a laser beam into two parts wi...

12
beam splitters
beam splitters
Specification: Total finish part Absorption < .15%
Detail: Beamsplitters allow partial reflectance at a 45° angle of incidence with a 10.6µm wavelength. Only a certain percentage of incident energy is reflected while the remaining incident energy is transmitted. A beam splitter is ...

13
end reflectors
end reflectors
Specification: Total finish part Absorption < .15%
Detail: End reflectors are key optical components in laser resonators.They usually has high reflectance of 99.5% or 99.7%. Because absorption in the coating is higher than in the output coupler, substrate materials, such as Ge or GaAs...

14
dbemr reflectors
dbemr reflectors
Specification: Reflectance > 90% average for .633 µm and .650 µm   45° Angle
Detail: TMS-DBEMR Dual-Band Max Reflector for Co2 + RED laser diode reflectance. These turning mirrors are used in Co2 laser beam delivery systems. Silicon is the most commonly used mirror substrate due to its good "figure of merit" ...

15
zero phase reflector
zero phase reflector
Specification: Reflectance > 99.6% average @ 10.6µm
Detail: The substrates of Zero phase reflectors are usually Silicon or OFHC Copper. In most laser machines, one or several Zero-Phase Reflectors are used to forward the laser beam from the cavity to the working head. At these mirrors,...

16
phase retarders
phase retarders
Specification: Reflectance: > 99.0% average @ 10.6µm
Detail: These mirrors are generally used as last mirror prior to focusing lens.They create a 90° Phase Shift with the aid of specially constructed thin film coating layers applied to the surface, when hit with a linear polarized beam...

17
fold mirror
fold mirror
Specification: Coated: Reflectance > 99.6% average @ 10.6 µm
Detail: Specifications Material: Silicon (Si) Single Crystal ...

18
meniscus znse lenses
meniscus znse lenses
Specification: Reflectance < 0.20% per surface @ 10.6µm
Detail: Meniscus lenses is made with laser grade zinc selenide with computer optimized anti-reflection coatings. We control the quality of the optic from material, through fabrication and coating to ensure you receive the highest qual...

19
plano-convex znse lens
plano-convex znse lens
Specification: Reflectance < 0.20% per surface @ 10.6µm
Detail: Plano-convex lenses has one flat surface and one convex surface and is made with laser grade zinc selenide with computer optimized anti-reflection coatings. We control the quality of the optic from material, through fabricatio...
Showing 11 - 19 of 19, total 2 pages        [First] [Previous] [Next] [Last]
1 2 


Copyright© Wuhan Carman Haas Laser Technology Co.,Ltd. All Rights Reserved.
Tel : +86 27 88855190 Fax : +86 27 88855190
Powered by 86exporter.com